BATTERY OPERATION INSTRUCTIONS

GET STARTED

Screw the magnet adaptor ring onto the cartridge.  Insert the cartridge into the battery. The cartridge is held in magnetically.


POWER ON AND OFF

Press the button five times quickly.  LED light will light for 1.5 seconds during power on, and light once quickly during power off.



​

SMART PRE-HEAT FUNCTION

Press the button 2 times quickly to gently pre-heat the oil. The LED will slowly pulse red until the button is pressed.



​

VARIABLE VOLTAGE

Press the button 3 times quickly to cycle through voltage settings. LED will flash green (2.6V), yellow (3.3V), red (4.1V).



​

OVER ACTIVATION PREVENTION

If the button is pressed for more than 8 seconds, the LED will flash green 6 times and stop activating until the button is pressed again.



​

CHARGE INDICATION
When charging, LED will pulse red (<30%), yellow (30%-70%), green (>70%), with solid green LED indication fully charged.